Application:

• High, Medium and Low Temperature
• R134a, R22, R502, R404A, R507
• 3 to 30 HP

Standard Features:

Indoor Unit:
• Weatherproof Electrical Control Panel with Compressor Contactor   and Fused Control   Circuit
• Spring Mounted, Accessible Semi-Hermetic Compressor
• Discharge Vibration Eliminator
• Copper Tubing Secured with Hydra-Zorb/Cush- A-Clamp
• Receiver with Fusible Plug and Liquid Shut-Off Valve
• Fan Guard
• Adjustable Dual High/Low Pressure Control
• Oil Failure Control (on applicable models)
• Demand Cooling™ (on R22 low temp. models)
• Copper Tube, Aluminum Fin Condenser Coil

Outdoor Unit:
All Standard Features Of Indoor Unit Plus:
• Outdoor Weather-Resistant Housing with Removable Hood
• Sealed Liquid Line Filter Drier and Sight Glass
• Flooded Head Pressure Control (Non Adjustable)
• Adjustable Pressure or Ambient Fan Cycling Control (2 fan Models)
• Crankcase Heater
• Pump Down Toggle Switch

Optional Features (Factory Mounted):
• Suction Accumulator
• Sealed or Replaceable Core Suction Filter with Vibration Eliminator
• Over-sized Receiver
• Heated and Insulated Receiver
• Receiver Inlet Valve
• Sealed or Replaceable Core Liquid Line Filter Drier and Sight Glass
• Liquid Line Solenoid Valve with 230 Volt Coil (Shipped   Loose)
• Sentronic™ Oil Failure Control
• Ball Valve (Shipped Loose)
• Two Valve Adjustable Flooded Head Pressure Control
• Flex Hose On All Controls
• Oil Separator c/w Oil Return Solenoid Valve
• Compressor Circuit Breaker
• Compressor Time Delay Relay
• Pump Down Toggle Switch
• Time Clock
• Defrost Contactor with Fuse Block
• Evaporator Fan Contactor with Fuse Block
• Fused Disconnect
• Phase/Voltage Monitor
• Voltages Available for 60Hz or 50Hz