|
For use on TWO independent refrigeration systems
(one system used for back-up) using pumpdown
control mode. (Thermostat wired into liquid
line solenoid valve).
Panel can be mounted at the first condensing
unit on indoor installations or be mounted
remote inside on a wall when used
with outdoor condensing units.
The panel is designed to operate each system
automatically every 24 hours or can be manually
set to run either system independently.
The remote control panel can be easily installed
and wired by installing a contactor (provided
loose) to each system. Each contactor interrupts
the power to the defrost clock/ thermostat
and liquid solenoid circuits which enables the
condensing unit to pumpdown and shut
down the system.
The panel is suitable for Air defrost (with
or without clock) or Hot gas systems as well
as Electric defrost evaporator systems.
Refer to the Product Data & Installation
brochure for further information.
Features
/ Options:
115/1/60, 208-230/1/60 and 200-220/1/50
|