Proven Dependable.
Bally Rep Login
Bally Logo
 
BV-Line
Outdoor Air-Cooled Condensing Units

Designed for large Walk-In Coolers and Freezers, Blast Chillers, Warehouses, and as an air conditioning unit.


SPECIFICATIONS 60Hz
Applications:
  • 15 HP to 100 HP (Air conditioning, High & Medium Temp)
  • 10 HP to 80 HP (Low Temperature.)
  • High, Medium, and Low Temperatures.
  • R404a, R507, R22.
Standard Features:
  • Units are UL Listed.
  • Compressors: Copeland Discus, Bitzer reciprocating, Carlyle reciprocating, Copeland Screw.
  • Single, Dual, and parallel-piped compressor configurations.
  • Thermospan™ condenser core design eliminates tube sheet leaks.
  • 3/8" condenser tubes reduce refrigerant charge.
  • Permanently lubricated ball-bearing condenser fan motor(s).
  • Receiver inlet/outlet valves and safety pressure relief valve.
  • Pre-formed internal piping.
  • Lock-out relay de-energizes the liquid line solenoid valve.
  • SPDT contact is provided for alarm circuit.
  • Spring-mounted compressor with discharge vibration eliminator.
  • Compressor crankcase heater.
  • Condenser fan cycling control (on 2fan+ models).
  • Part-winding start (30 HP+ operating on 208/230V-3Ph).
  • Compressor head cooling fans(Low temperature).
  • Flexible hose on all compressor pressure control connections (Refrigeration models).
  • Two valve adjustable head pressure control (Refrigeration models).
  • Replaceable liquid line drier & sight glass (Refrigeration models).
  • Anti-short cycle time delay relay (Refrigeration models).
  • Discharge line thermostat (Refrigeration models).
  • Separate HP & LP compressor controls (Refrigeration models).
  • Sub-cooling circuit (Medium & Low Temperature units).
Options:
  • Optional coating and fin surfaces.
  • Suction accumulator (with or without heat exchanger).
  • Replaceable suction filter.
  • Insulated suction lines.
  • Crankcase Pressure Regulating valve.
  • Compressor capacity control (when applicable).
  • Discharge line check valve.
  • Hot gas bypass tees, regulating valves, de-superheating TXV.
  • Heated and insulated receiver.
  • Thermosaver™ hot gas defrost.
  • Disconnect switch (fused or non-fused).
  • Compressor circuit breaker.
  • Electronic Oil failure control.
  • Voltage/Phase monitors.
  • Defrost Time clock.
  • Defrost Heater/Evaporator Fan Contactors with fuse block.



Site Map | Terms & Conditions | Contact Us | Family of Companies | Home

© Bally Refrigerated Boxes, Inc.

Top